› Supports Intel® Celeron® M Processor.

› Supports 400 MHz Front Side Bus.

› Supports 200 MHz, 266 MHz DDR SDRAM.

› Supports up to 2 Channel 36 bits LVDS for LCD.

› Supports four USB 2.0 ports.

› Supports two SATA ports.

› Supports Intel® Pentium® M/Intel Celeron® M Processor.

› Fanless operation @ 0 ~ 60° C.

› Supports 400 MHz Front Side Bus.

› Supports 200 MHz, 266 MHz and 333 MHz DDR SDRAM.

› Supports up to 2 Channel 36 bits LVDS for LCD.

› Supports four USB 2.0 ports.

› Supports Enhanced Intel SpeedStep Technology (Intel Pentium M).

› Fanless version available with onboard Intel Celeron M 600 MHz.

› Embedded new generation Intel® Pentium® M/Intel Celeron® M Processor.

› Supports 400 MHz Front Side Bus.

› Supports up to 1000Base-T Ethernet on board.

› Supports up to 2 Channel 36 bits LVDS for LCD.

› Supports four USB 2.0 ports.

› Supports two SATA ports.

› Supports Enhanced Intel SpeedStep technology (Intel Pentium M).

› Fanless operation @ 0 ~ 60° C (Celeron M 600 MHz/Pentium 1.1 GHz).

› 32-bit PCI Slot.

› Supports Socket 370 Intel® Celeron®/Intel Pentium® III Processor up to.

› Supports up to 100/133 MHz FSB.

› Direct AGP VGA.

› Built-in AMD GeodeT LX800, 500 MHz CPU.

› Supports 266/333 MHz DDR SODIMM, up to 1 GB.

› On board 256 MB DDR SDRAM.

› Supports 10/100Base-T Ethernet.

› Supports up to two Serial ATA devices.

› Four COM ports.

› Four USB 2.0 ports .

› Intel® Celeron® M CPU 852GM+ICH4 Chipsets.

› 200 pin SODIMM socket DDR 200/266 MHz SDRAM up to 1 GB.

› 10/100 Base-T Ethernet.

› Low power consumption and fanless.

› VIA Mark 533/800 MHz CPU.

› 128 MB Memory on board, support 1 SODIMM socket SDRAM up to 512 MB.

› 10/100 Base-T Ethernet.

› Low power consumption and fanless.

› Low power Fanless EVA-X4300.

› Onboard 128/64 DDR2 RAM.

› 1 10/100 Base-T Ethernet.

› 1024 x 768 @ 18/24 bit TTL/LVDS support.

› Ultra-compact wallmount/desktop IPC chassis.

› Supports up to 4 half-size cards.

› Supports one 3.5" FDD and one internal 3.5" HDD.

› Power switch on the rear plate.

› One 53-CFM cooling fan.

› Equipped with 150 W ATX power supply.

› Easy-to-replace fan filter.

› Reserved I/O port openings (two 9-pin and one 25-pin) on the rear plate.

› Ultra-compact wallmount/desktop IPC chassis.

› Two (9-pin and 25-pin) I/O ports.

› Power on switch with connector.

› One 53-CFM cooling fan with air filter.

› 65 W AC power supply option.

› Three models with different sizes to support various industrial applications.

› Supports versatile 6-slot backplanes.

› Supports front USB interface.

› IPC-6806W is especially equipped with a front-mounted 5.25" drive bay for an optical disk drive.

› Streamlined filtered airflow.

› Optimized open-frame card cage design for embedded systems.

› Adjustable hold-down clamp protects cards from vibration.

› Plug-in termination resistors for high-speed signals.

› Terminal-block connectors supply power from board .

› Supports 6-slot backplanes.

› Mounting holes provided for installing one PS/2 power supply, one 3.5" HDD, and one cooling fan.

› 8-slot PC/AT-compatible (ISA-bus) passive backplane.

› 4-layer PCB with ground and power planes for reduced noise and lower power-supply impedance.

› LED power indicators for +5 V, +12 V, -5 V, -12 V.

› Size: 216 mm x 170 mm (8.5" x 6.7").

› 6-slot PC/AT-compatible (ISA-bus) passive backplane.

› 4-layer PCB with ground and power planes for reduced noise and lower power-supply impedance.

› LED power indicators for +5 V, +12 V, -5 V, -12 V.

› Terminal-block connectors supply power from board.

› Size: 143 mm x 175 mm (5.6" x 6.9").

› 4-slot PC/AT-compatible (ISA-bus) passive backplane.

› 4-layer PCB with ground and power planes for reduced noise and lower power-supply impedance.

› LED power indicators for +5 V, +12 V, -5 V, -12 V.

› Size: 94.7 mm x 186 mm (3.7" x 7.3").

› 4-slot PCI passive backplane.

› 4-layer PCB with ground and power planes for reduced noise and lower power supply impedance.

› AT power connectors (ATX optional).

› LED power indicators for +5 V & +12 V.

› Size: 110 mm x 180 mm (4.3" x 7").

› 4-slot PCI passive backplane.

› 4-layer PCB with ground and power planes for reduced noise and lower power supply impedance.

› AT power connectors (ATX optional).

› LED power indicators for +5 V & +12 V.

› Size: 110 mm x 180 mm (4.3" x 7").